Narrow Sofa Table Saving Space Living Room
A narrow sofa table is located behind a sofa. The long and narrow table is relatively simple to build, especially if a simple design is done with the legs stretched and without much adornment. Stain the board console to match the rest of your furniture. If you are using the table between the sofa and the wall, you can leave it without spots, since nobody will see it.
You will use power tools to build the diy sofa table, so be careful and wear protective glasses. Cut the 2-by-4-inch boards into four 30-inch long pieces using the circular saw or hand saw. Some protective glasses during the cut. These are the legs of the table. Cut the boards 2 by 1 inch into two long pieces of 9 inches long and two pieces of 36 inches. Sand the edges of the boards so that they are soft. Drill four 1/2-inch deep holes through time, each narrow side 36 inches long, 2 by 1-inch board.
Space holes evenly spaced, starting at 3 inches on each side. Also drill three 1/2-inch deep holes in the entire length, narrow side of the 9-inch long, 2-by-1-inch board. Make two 1/2-inch deep holes on each short side of the long console tables ikea of 36 inches and 9 inches. Space the holes 1 inch apart, 1/2 inch at the top and bottom edges.